增加基站配置的章节说明

刘琴
1 parent d9323883
Showing 3 changed files with 33 additions and 2 deletions
Communication protocol-B200W-MQTT Protocol.md
img/mqtt_7.png
通讯协议-B200W-MQTT协议[外].md
@@ -28,7 +28,23 @@ Use the MQTT.FX client to configure the domain name, port, username and password
 ![](img/mqtt_2.png)
  
  
+## Base Station Configuration
  
+1. Connect the base station via USB and open the base station server configuration software(SunVoteServerIPSettings).
+
+![](img/mqtt_7.png)
+
+2. If the base station is not connected to the computer, the tool will display "Detecting base station." In this case, read and write operations will be invalid.
+
+3. Once the connection is established, proceed to write the necessary information.
+
+4. Set the base station's server domain name (IP), port, user information, and password information, then write them into the base station.
+
+5. If the MQTT server does not require username and password authentication, you can randomly set the username and password.
+
+6. Disconnect the USB, connect the Ethernet cable, and check whether the network connection is normal (observe if the light on the base station is flashing blue).
+
+<a href="/Elvis/public/blob/master/soft/SunVoteServerIPSettings 1.0.1.3.exe" target="_blank" >Click here to download the server configuration software</a> 
  
 # Function Description
  
@@ -3,7 +3,7 @@
  
  
  
-
+[toc]
  
  
  
@@ -27,8 +27,23 @@ MQTT服务器配置结果检查
  
 ![](img/mqtt_2.png)
  
-  
+## 基站配置
+
+通过USB连接基站，打开基站服务器配置软件。
+
+![](img/mqtt_3.png)
+
+如果基站没有连接电脑，工具显示检测基站中，这时候读写无效。
+
+连接正常后，按照各个信息进行写入。
+
+设置基站服务器域名（ip）、端口，用户信息、密码信息，写入基站。
+
+如果MQTT服务器没有启用用户密码验证，用户密码信息可以随机设置。
+
+拔掉USB，连接网线，接入网络，查看网络是否连接正常。（基站上面的灯是否蓝色闪烁）
  
+服务器IP设置<a href="/Elvis/public/blob/master/soft/SunVote 服务器IP设置 1.0.1.2.exe" target="_blank" >软件下载</a>
  
 # 功能说明