diff --git a/Communication protocol-B200W-MQTT Protocol.md b/Communication protocol-B200W-MQTT Protocol.md index 03b0c16..cb561b1 100644 --- a/Communication protocol-B200W-MQTT Protocol.md +++ b/Communication protocol-B200W-MQTT Protocol.md @@ -28,7 +28,23 @@ Use the MQTT.FX client to configure the domain name, port, username and password ![](img/mqtt_2.png) +## Base Station Configuration +1. Connect the base station via USB and open the base station server configuration software(SunVoteServerIPSettings). + +![](img/mqtt_7.png) + +2. If the base station is not connected to the computer, the tool will display "Detecting base station." In this case, read and write operations will be invalid. + +3. Once the connection is established, proceed to write the necessary information. + +4. Set the base station's server domain name (IP), port, user information, and password information, then write them into the base station. + +5. If the MQTT server does not require username and password authentication, you can randomly set the username and password. + +6. Disconnect the USB, connect the Ethernet cable, and check whether the network connection is normal (observe if the light on the base station is flashing blue). + +Click here to download the server configuration software # Function Description diff --git a/img/mqtt_7.png b/img/mqtt_7.png new file mode 100644 index 0000000..1cdd3fb --- /dev/null +++ b/img/mqtt_7.png diff --git a/通讯协议-B200W-MQTT协议[外].md b/通讯协议-B200W-MQTT协议[外].md index 7dc93f8..4cb87d6 100644 --- a/通讯协议-B200W-MQTT协议[外].md +++ b/通讯协议-B200W-MQTT协议[外].md @@ -3,7 +3,7 @@ - +[toc] @@ -27,8 +27,23 @@ MQTT服务器配置结果检查 ![](img/mqtt_2.png) - +## 基站配置 + +通过USB连接基站，打开基站服务器配置软件。 + +![](img/mqtt_3.png) + +如果基站没有连接电脑，工具显示检测基站中，这时候读写无效。 + +连接正常后，按照各个信息进行写入。 + +设置基站服务器域名（ip）、端口，用户信息、密码信息，写入基站。 + +如果MQTT服务器没有启用用户密码验证，用户密码信息可以随机设置。 + +拔掉USB，连接网线，接入网络，查看网络是否连接正常。（基站上面的灯是否蓝色闪烁） +服务器IP设置软件下载 # 功能说明