gd32f30x_dbg.c
5.96 KB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
/*!
\file gd32f30x_dbg.c
\brief DBG driver
\version 2017-02-10, V1.0.0, firmware for GD32F30x
\version 2018-10-10, V1.1.0, firmware for GD32F30x
\version 2018-12-25, V2.0.0, firmware for GD32F30x
\version 2020-09-30, V2.1.0, firmware for GD32F30x
*/
/*
Copyright (c) 2020, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#include "gd32f30x_dbg.h"
#define DBG_RESET_VAL 0x00000000U
/*!
\brief deinitialize the DBG
\param[in] none
\param[out] none
\retval none
*/
void dbg_deinit(void)
{
DBG_CTL0 = DBG_RESET_VAL;
}
/*!
\brief read DBG_ID code register
\param[in] none
\param[out] none
\retval DBG_ID code
*/
uint32_t dbg_id_get(void)
{
return DBG_ID;
}
/*!
\brief enable low power behavior when the mcu is in debug mode
\param[in] dbg_low_power:
this parameter can be any combination of the following values:
\arg DBG_LOW_POWER_SLEEP: keep debugger connection during sleep mode
\arg DBG_LOW_POWER_DEEPSLEEP: keep debugger connection during deepsleep mode
\arg DBG_LOW_POWER_STANDBY: keep debugger connection during standby mode
\param[out] none
\retval none
*/
void dbg_low_power_enable(uint32_t dbg_low_power)
{
DBG_CTL0 |= dbg_low_power;
}
/*!
\brief disable low power behavior when the mcu is in debug mode
\param[in] dbg_low_power:
this parameter can be any combination of the following values:
\arg DBG_LOW_POWER_SLEEP: donot keep debugger connection during sleep mode
\arg DBG_LOW_POWER_DEEPSLEEP: donot keep debugger connection during deepsleep mode
\arg DBG_LOW_POWER_STANDBY: donot keep debugger connection during standby mode
\param[out] none
\retval none
*/
void dbg_low_power_disable(uint32_t dbg_low_power)
{
DBG_CTL0 &= ~dbg_low_power;
}
/*!
\brief enable peripheral behavior when the mcu is in debug mode
\param[in] dbg_periph: refer to dbg_periph_enum
only one parameter can be selected which is shown as below:
\arg DBG_FWDGT_HOLD : debug FWDGT kept when core is halted
\arg DBG_WWDGT_HOLD : debug WWDGT kept when core is halted
\arg DBG_CANx_HOLD (x=0,1,CAN1 is only available for CL series): hold CANx counter when core is halted
\arg DBG_I2Cx_HOLD (x=0,1): hold I2Cx smbus when core is halted
\arg DBG_TIMERx_HOLD (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are not available for HD series): hold TIMERx counter when core is halted
\param[out] none
\retval none
*/
void dbg_periph_enable(dbg_periph_enum dbg_periph)
{
DBG_REG_VAL(dbg_periph) |= BIT(DBG_BIT_POS(dbg_periph));
}
/*!
\brief disable peripheral behavior when the mcu is in debug mode
\param[in] dbg_periph: refer to dbg_periph_enum
only one parameter can be selected which is shown as below:
\arg DBG_FWDGT_HOLD : debug FWDGT kept when core is halted
\arg DBG_WWDGT_HOLD : debug WWDGT kept when core is halted
\arg DBG_CANx_HOLD (x=0,1,CAN1 is only available for CL series): hold CAN0 counter when core is halted
\arg DBG_I2Cx_HOLD (x=0,1): hold I2Cx smbus when core is halted
\arg DBG_TIMERx_HOLD (x=0,1,2,3,4,5,6,7,8,9,10,11,12,13,TIMER8..13 are not available for HD series): hold TIMERx counter when core is halted
\param[out] none
\retval none
*/
void dbg_periph_disable(dbg_periph_enum dbg_periph)
{
DBG_REG_VAL(dbg_periph) &= ~BIT(DBG_BIT_POS(dbg_periph));
}
/*!
\brief enable trace pin assignment
\param[in] none
\param[out] none
\retval none
*/
void dbg_trace_pin_enable(void)
{
DBG_CTL0 |= DBG_CTL0_TRACE_IOEN;
}
/*!
\brief disable trace pin assignment
\param[in] none
\param[out] none
\retval none
*/
void dbg_trace_pin_disable(void)
{
DBG_CTL0 &= ~DBG_CTL0_TRACE_IOEN;
}
/*!
\brief trace pin mode selection
\param[in] trace_mode:
\arg TRACE_MODE_ASYNC: trace pin used for async mode
\arg TRACE_MODE_SYNC_DATASIZE_1: trace pin used for sync mode and data size is 1
\arg TRACE_MODE_SYNC_DATASIZE_2: trace pin used for sync mode and data size is 2
\arg TRACE_MODE_SYNC_DATASIZE_4: trace pin used for sync mode and data size is 4
\param[out] none
\retval none
*/
void dbg_trace_pin_mode_set(uint32_t trace_mode)
{
DBG_CTL0 &= ~DBG_CTL0_TRACE_MODE;
DBG_CTL0 |= trace_mode;
}