4872303f
 李外
V100.0.7
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
|
#include "SEGGER_RTT.h"
#include "SEGGER_RTT_Conf.h"
#include <stdlib.h>
#include <stdarg.h>
#include "my_headfile.h"
#include "base_config.h"
#include "HW_MCUIO.h"
#include "gd32f30x_gpio.h"
#include "gd32f30x_exti.h"
////write
//#define HAL_GPIO_WritePin gpio_bit_write
//#define GPIO_PIN_SET SET
//#define GPIO_PIN_RESET RESET
////read
//#define HAL_GPIO_ReadPin gpio_input_bit_get
////
//#define HAL_GPIO_TogglePin gpio_bit_toggle
unsigned int const dbg_io_port[] ={GPIOD,GPIOD,GPIOD,GPIOD };
unsigned int const dbg_io_pin[]={GPIO_PIN_11,GPIO_PIN_12,GPIO_PIN_13,GPIO_PIN_14};
#define DBG_IO_COUNT 4
static void debug_io__init(void)
{
HW_GPIO_InitTypeDef GPIO_InitStruct;
for(unsigned char i=0;i<DBG_IO_COUNT;i++){
/* configure GPIO port */
//rcu_periph_clock_enable(RCU_GPIOE);
/*Configure GPIO pin Output Level */
HW_GPIO_ResetPin(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6);
/*Configure GPIO pin Output Level */
HW_GPIO_ResetPin(GPIOA, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_8);
/*Configure GPIO pin Output Level */
HW_GPIO_ResetPin(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
/*Configure GPIO pins : PC1 PC4 PC5 PC6 */
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
GPIO_InitStruct.Mode = HW_GPIO_MODE_OUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = HW_GPIO_SPEED_VERY_HIGH;
HW_GPIO_Init(GPIOC, &GPIO_InitStruct);
// gpio_mode_set(dbg_io_port[i], GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,dbg_io_pin[i]);
// gpio_output_options_set(dbg_io_port[i], GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ,dbg_io_pin[i]);
}//for
}
/*----------------- IO debug ----------------------------
* dpi led seq:Led2-Led1-Led4-Led3;
*/
void _debug_io_ctrl(dbgIO_nmb_enum numb, dbgIO_stat_enum st)
{
unsigned char i = numb;
switch(st){
case 0: //off
HAL_GPIO_WritePin(dbg_io_port[i],dbg_io_pin[i], GPIO_PIN_RESET);
break;
case 1: //on
HAL_GPIO_WritePin(dbg_io_port[i],dbg_io_pin[i], GPIO_PIN_SET);
break;
case 2: //toggle
HAL_GPIO_TogglePin(dbg_io_port[i],dbg_io_pin[i]);
break;
default:
break;
}//sw
}
//------------------------------------------------------------------------------------------------
extern int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList);
extern int _VPrintHost(const char* s, unsigned int Options, va_list* pParamList);
int _user_SEGGER_RTT_printf(unsigned char md, const char * sFormat, ...)
{
if(md==0) return 0;
int r;
va_list ParamList;
va_start(ParamList, sFormat);
#if 1
r = SEGGER_RTT_vprintf(0, sFormat, &ParamList);
#else
SEGGER_SYSVIEW_PrintfHost(sFormat,&ParamList); //
#endif
va_end(ParamList);
if( r<0){
r =0;
}
return r;
}
void _user_print_buf(unsigned char md,const char * sFormat,const unsigned char *buf,unsigned char len)
{
_user_SEGGER_RTT_printf(md,sFormat);
for(unsigned char i=0;i<len;i++)
_user_SEGGER_RTT_printf(md,"%02x ",buf[i]);
_user_SEGGER_RTT_printf(md,"\r\n");
}
//-------------------------------------------------------------------
void user_printf_warn(const char * sFormat, ...)
{
if(PRINT_DBG_WARN ==0) return;
va_list ParamList;
va_start(ParamList, sFormat);
SEGGER_RTT_vprintf(0, "<<<<-!WARN!!WARN!!!WARN->>>", &ParamList);
SEGGER_RTT_vprintf(0, sFormat, &ParamList);
va_end(ParamList);
}
void user_printf_error(const char * sFormat, ...)
{
if(PRINT_DBG_ERROR ==0) return;
va_list ParamList;
va_start(ParamList, sFormat);
SEGGER_RTT_vprintf(0, "<<<<-!ERROR!!ERROR!!!ERROR->>>", &ParamList);
SEGGER_RTT_vprintf(0, sFormat, &ParamList);
va_end(ParamList);
}
void _debug_init(void)
{
// SEGGER_RTT_Init();
//SEGGER_RTT_ConfigUpBuffer(0, NULL, NULL, 0, SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL);
/* 配置通道0，上行配置（STM32->RTT Viewer软件） */
SEGGER_RTT_ConfigUpBuffer(0, "RTTUP", NULL, 0, SEGGER_RTT_MODE_NO_BLOCK_SKIP);
/* 配置通道0，下行配置（RTT Viewer软件->STM32） */
SEGGER_RTT_ConfigDownBuffer(0, "RTTDOWN", NULL, 0, SEGGER_RTT_MODE_NO_BLOCK_SKIP); //
//SEGGER_SYSVIEW_Conf();
debug_io__init();
}
struct debug_STR my_debug={
.init = _debug_init,
.ctrl_io = _debug_io_ctrl,
.printf = _user_SEGGER_RTT_printf,
.print_buf = _user_print_buf,
.process_input = rx_rtt_process,
.printf_warn = user_printf_warn,
.printf_error =user_printf_error,
};
unsigned int PRINT_DBG_CTRL =PRINT_DBG_CTRL_DEFAULT;//xffffffff;
|
